Manufacturing Procedures and Notices for Resident Containers
Resident containers are a very convenient kind of residence. What are the manufacturing steps of residential containers and the precautions for manufacturing residential containers?
The first step is to weld the chassis around the steel skeleton chassis with 140*50 channel steel. The chassis beams of 3 m*6 m residential container movable room are all welded with 4*8*2.0 square steel. The spacing is 35 cm. The six columns of the house and the four-sided ring beams of the roof are all welded with 5*5*2.0 square steel.
The second step is the splicing of color steel plates. The wall panels and roof panels of this type of house are all made up of 50 mm thick contaminated panels. Both sides are white. The window size is 930*1000 push-pull windows. The door guard specially made color steel plate doors are 930*2000 in size. The chassis is all made of construction formwork with thickness of 18 mm, which bears the load on each level. The rice is 200 kilograms.
The third step is to lay a layer of high-grade floor leather in the air of the chassis after the secondary structural device of the house, so that the effect is warm, high-grade, clean and waterproof.
The fourth step is to install lighting lights and switch sockets and reserved air conditioning holes. Common lighting lights are installed at both ends of the house. Switches are installed next to the door. The socket device is 60 centimeters away from the air, and the air conditioning holes are opened on the oblique side of the door.
The fifth step is to install the window anti-theft net at the first step and put on the waterproof glue of the window door and the roof panel. The waterproof glue of the roof panel must use the glass curtain wall waterproof glue. Because the ordinary glue will be dripping with the wind and rain, the waterproof function can only last half a year, and the waterproof function of the glass curtain wall glue is more than 5-6 times stronger than the traditional glue.
1, pay attention to fire prevention.
Do not weld near the wall; fire-proof installation should be added to heating stoves in summer; blowtorch is strictly prohibited under housing information; metal pipes should be used when laying outdoor lines, and reliable grounding or refractory data pipes should be selected. In addition, sleeve should be added to stop protection when passing through the wall.
2, air fixed
Because of its lighter weight than the whole steel structure, the container movable room of color steel plate can be blown by the wind when it meets the 8-level breeze, and has the risk of breaking out. When using color steel plate container, it should have fixed bottom installation just like building color steel house. It is not serious in the inland sea area, but in coastal cities of our country, typhoons often attack, so the movable room of container room must be fixed.
3, stop the three level.
We often see three-storey Guangzhou residential containers on the construction site, but for the container activity room of color steel plate, because of its lighter texture, the three container rooms are really superimposed together, which has great potential for safety.
4, waterproof information
The use of waterproofing materials should be stopped according to the matters needing attention. Guangzhou Steel Structural Workshop Company pointed out that every link should be linked, no link can show results, in the quality process of strict checks. The data about steel structure design only need to do this, and will not show great achievements, so this is very important.
Another thing we need to pay attention to is that we should take remedial measures when stopping the cause of leakage. Make less detours in the process of application to ensure the safety and accuracy of the data.
To sum up all the above-mentioned information provided by Jinan Pengkai Container Co., Ltd., we would like to know more about Jinan's resident containers. Welcome to our website: http://iyda.net. Thank you for your support!